SEM and Dual Beam

Ubicación:Location: lma - zaragoza

35€ /Hour<br> (With technician)
21€ /Hour<br> (With technician)
35€ /Hour<br> (With technician)
46€ /Hour<br> (With technician)
Solicitar Request
Tarifas Rates Solicitar Request

A scanning electron microscope (SEM) is a type of electron microscope that produces images of a sample by scanning it with a focused beam of electrons. The electrons interact with the sample, producing various signals that can be detected in the electron microscope detectors giving information about surface topography and composition of the sample.
 
The Inspect F-50 SEM instrument is a general-purpose field-emission Scanning Electron Microscope for high-resolution imaging and composition analysis by energy-dispersive X-ray microanalysis (EDS).

 

What can be done with it?

Image / Analysis

By using the different SEM Detectors with which this instrument is equipped, the following information can be obtained:
 
  • Images with secondary electrons image and topography by means of an ETD (Everhart-Thornley Detector).
  • Image and composition by using a BSED (Back Scattering Electron Detector).
  • Elemental chemical analysis by means of Energy-dispersive X-ray spectroscopy (EDX).

 

Sample requirements:

Liquid and non-conductive samples observed need to be dried and metallized prior to observation. Samples studied at low vacuum can be used without metallization at low voltage (low contrast and low sharpness images).
 
Types of samples that can be studied with Inspect F-50 SEM include:
 
  • Conductive and non-conductive samples, bulk, films, coatings, powders (compacted), etc.
  • Samples compatible with high vacuum conditions.
  • Sample Diameter from less than 1 mm up to 50 mm.

 

Technical specifications:

  • SEM
1 kV: 3.0 nm without BSED
30kV: 1.0 nm
Maximum beam current: 200 nA
 
  • VACUUM
High vacuum (only mode)
X x Y x Z (mm): 50 x 50 x 50 mm
 
  • STAGE
Tilt -15º a 75º
Rotation: 360º
 
  • DETECTION
Solid state BSE: BSED
ETD: SE
 
 

Images: